Is it possible that there is a loose cable from the shifter to the transmission making the car unable to tell which gear it is in?

1. What connects the shifter to the transmission?
2. Is shifter cable part of transmission?
3. How do I know if my shifter cable is stretched?
4. What does it mean when your shifter is loose?
5. What does a shifter cable do?
6. What's a transmission cable?
7. How long does it take to replace a shifter cable?
8. Where is shifter cable located?
9. How much does it cost to fix shift linkage?
10. How long do shifter cables last?
11. What is a transmission shift cable bushing?

What connects the shifter to the transmission?

The shift cable runs up through the firewall and attaches to this lever. The cable runs from the firewall to the transmission gear shift linkage, where it is attached and held securely in place. As the handle is moved, it either pulls or pushes on the cable. In turn, the cable does the same to the transmission linkage.

Is shifter cable part of transmission?

In simple words, the transmission system of your vehicle is responsible for transferring the power generated in the engine to the wheels with the help of the shifter handle. The transmission is connected to the shifter handle with a shifter cable.

How do I know if my shifter cable is stretched?

As the cable stretches over the life of your vehicle, you may notice that the needle will point to reverse while you're in park, or positioned between reverse and neutral when you're in reverse. Sometimes you'll have a little bit of play in the shifter, even though the transmission is already in gear.

What does it mean when your shifter is loose?

Generally, most all gear shifters will become loose due to aggressive gear changing from the gear shifter. Aggressive gear changing can cause damage to the bushing on the bottom of the gear shifter lever. Once the bushing is damaged, it will cause slack in the gear shifter.

What does a shifter cable do?

What this shifter cable does is that it acts as the link between the shifter handle and transmission in your automatic transmission car. Basically, it is responsible for shifting the gears in your car whenever you are moving the shifter handle inside the vehicle.

What's a transmission cable?

noun. a coaxial cable, waveguide, or other system of conductors that transfers electrical signals from one location to another.

How long does it take to replace a shifter cable?

The time it takes to replace a shift cable will vary across car make and model. On average, the shifter cable takes 1.5-2 hours to install. If the whole cable does not need to be replaced, other repairs on the same part may take less time to complete.

Where is shifter cable located?

The shift selector cable connects the gear shifter, located on the steering column or on a floor mounted console, to the automatic transmission. The cable is typically steel and is protected from the elements by a plastic outer sheath.

How much does it cost to fix shift linkage?

If the cause turns out to be a loose shifter linkage, you can tighten it yourself at no cost, or have the repair-shop do it for $50-75. If the condition is being caused by a damaged shifter cable, the repair-shop will charge you $125-$250 for replacement, or you can purchase and replace it yourself for around $35-$80.

How long do shifter cables last?

With that being said, your shift selector cable doesn't have a specified lifespan. It lasts as long as it lasts. In most cases, you should get at least five to eight years out of it, but premature failure isn't uncommon.

What is a transmission shift cable bushing?

The transmission shifter cable or linkage bushing is used to connect the shift cable to the transmission linkage.