Never do what on or near a railroad track while driving?

Always stop if you see a train coming or you hear the whistle, horn, or bell of an approaching train. Never go under lowering gates or around lowered gates. Flashing red warning lights indicate you must stop and wait. Don't proceed over the railroad tracks until the red lights stop flashing, even if the gate rises.

1. When approaching railroad tracks you should never?
2. When approaching a railroad track you should?
3. When approaching a railroad crossing drivers should?
4. What is it that you should not walk near or climb on?
5. What is railroad safety?
6. What is rail safety Week?
7. How far back from a railroad should you stop?
8. How far should you stop from railroad tracks?
9. How far from the nearest rail should you stop at a highway rail crossing?
10. When driving around a curve your vehicle will tend to?
11. When backing up it is best to what?
12. What are two reasons you should never walk on railroad tracks?
13. What side of path should you walk on?

When approaching railroad tracks you should never?

Never ignore flashing lights, whistles, closing gates or stop signs. Slow down, look in both directions, and test your brakes. Be certain you don't see a train. Roll down windows; turn off fans and radios; listen for warning whistles.

When approaching a railroad track you should?

When approaching railroad tracks, you should:

Look, listen, slow down, and be prepared to stop. Speed up to cross the tracks before the gate is lowered. Try to drive around a lowered gate. Not pay attention to how many tracks there are to cross.

When approaching a railroad crossing drivers should?

Explanation Any driver or pedestrian approaching a railroad crossing must stop within 50 feet, but not less than 15 feet, from the nearest rail of the railroad when warning lights are flashing, crossing gates are lowered, or drivers are otherwise instructed to stop.

What is it that you should not walk near or climb on?

Do not walk on or over railroad property – this is trespassing! Railroad tracks, trestles, yards and equipment are private property and trespassers are subject to arrest and fine. Cross tracks only at designated pedestrian or roadway crossings.

What is railroad safety?

The Railroad Operations and Safety Branch (ROSB) is responsible for ensuring that California communities and railroad employees are protected from unsafe practices on freight and passenger railroads by enforcing state and federal rail safety rules, regulations, and inspection efforts; and by carrying out proactive ...

What is rail safety Week?

This annual weeklong effort concentrates public attention on the need for rail safety education and saves lives by educating and empowering the public to make safe decisions around tracks and trains.

How far back from a railroad should you stop?

When required to stop, you should do so within 50 feet, but no less than 15 feet from the nearest rail of the crossing. How far away should you stop from a railroad crossing? The chance of death or serious injury in a collision between a train and a motor vehicle is 40 times greater than for other highway accidents.

How far should you stop from railroad tracks?

Pursuant to California Vehicle Code § 22451, drivers or pedestrians must stop at least 15 feet away from the nearest rail when approaching a railroad if a signaling device or flagman gives a warning or the person can see an approaching train or other on-track equipment.

How far from the nearest rail should you stop at a highway rail crossing?

Stop, look and listen – Stop no closer than 15 feet and no farther than 50 feet from the crossing. Open windows and doors, look both ways carefully and look and listen for a train.

When driving around a curve your vehicle will tend to?

In a curve or corner, the vehicle will want to go straight ahead while you want to turn.

When backing up it is best to what?

When you are backing up, it is usually best to:

Steer with one hand while looking over your shoulder through the rear window. Explanation Turn your head to look behind you before and while backing up. Steer with one hand when backing up or when operating vehicle controls.

What are two reasons you should never walk on railroad tracks?

10. What are two reasons you should never walk on railroad tracks? Answer​: It is illegal (trespassing) and highly dangerous. 2.

What side of path should you walk on?

If there is no footway or footpath, walk on the right-hand side of the road so you can see oncoming traffic. You should take extra care and: be prepared to walk in single file, especially on narrow roads or in poor light. keep close to the side of the road.