What does the red lightning bolt mean on a 2005 Chrysler 300?

1. What does a red light with a lightning bolt mean?
2. How much does it cost to fix the electronic throttle control system on a Chrysler 300?
3. How do you reset the ESP BAS light on a Chrysler 300?
4. How do I reset my Chrysler throttle body?
5. How do I reset my electronic throttle light?
6. Can I drive with the throttle control warning light on?
7. Where is the electronic throttle control located?
8. What does ⚡ mean in a car?
9. How much does it cost to fix throttle body?
10. What does the lightning bolt on a car mean?
11. What does service electronic throttle control mean?
12. How much does it cost to replace a throttle body sensor?

What does a red light with a lightning bolt mean?

The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Get a code reader and scan the engine for any logged codes. The light may be on for a glitch and the electronic throttle control system needs to be reset. ... The check engine light may remain on.

How much does it cost to fix the electronic throttle control system on a Chrysler 300?

Chrysler 300 Throttle Body Replacement Cost Estimate. Labor costs are estimated between $35 and $44 while parts are priced at $369.

How do you reset the ESP BAS light on a Chrysler 300?

First all You need to do is turn the vehicle to the on position without the engine running. Next turn the wheel all the way to the left. Then all the way to the right. Back all the way to the left.

How do I reset my Chrysler throttle body?

To reset the system all You need to do is turn on the vehicle without starting the engine. After that You can just press down on the throttle pedal for ten seconds and wait until the engine light starts to blink. When that happens it is resetting the throttle body and the ECU's memory.

How do I reset my electronic throttle light?

Resetting your electronic throttle control manually can be a tricky job. First, make sure the accelerator pedal is fully released. Next, turn the ignition on and then turn it off and wait for ten seconds. During these ten seconds, be sure the throttle valve is moving by listening for a sound of operation.

Can I drive with the throttle control warning light on?

It is not safe to drive with an electronic throttle control light. While you might be lucky and only have a drop in fuel efficiency or a slight drop in acceleration, the problem can quickly get worse if the sensor readings continue to go awry.

Where is the electronic throttle control located?

A throttle position sensor (TPS) is a sensor used to monitor the air intake of an engine. The sensor is usually located on the butterfly spindle/shaft, so that it can directly monitor the position of the throttle. More advanced forms of the sensor are also used.

What does ⚡ mean in a car?

Electronic Throttle Control Indicator

This light, a lightning bolt between reversed brackets or parenthesis, will illuminate if there is a problem in the electronic throttle control system.

How much does it cost to fix throttle body?

When the throttle body fails, the engine won't be able to remove the right mixture and will start to experience problems. To replace your car's throttle body, you will pay as little as $370 or as much as $1,500. Labor should be between $70 and $260, and parts should cost you from $110 to $600.

What does the lightning bolt on a car mean?

The lightning bolt warning light alerts you to a fault in the electronic throttle control system in your vehicle. This may be a faulty throttle body, the throttle body sensor or possibly the throttle body control motor which is what controls the opening and closing of the throttle body as the motor requires more fuel.

What does service electronic throttle control mean?

Electronic throttle control (ETC) is an automobile technology which electronically "connects" the accelerator pedal to the throttle, replacing a mechanical linkage.

How much does it cost to replace a throttle body sensor?

The average replacement cost for the throttle position sensor is anywhere from $110 to $200. The parts cost is anywhere from $75 to $105 while the labor cost is anywhere from $35 to $95. In addition, you will have to account for any extra fees and taxes that get added on as well.