What Is a regulator to regulate looseness and tightness of stitch?

thread tension control. regulates tightness or looseness of thread. stitch width control.

1. What regulates tightness or looseness of the stitches?
2. Which part of the sewing machine that used to controls the looseness and tightness of stitches *?
3. What is stitch regulator?
4. What is a stitch width regulator?
5. What is spool pin?
6. Where do you place the spool of thread?
7. How will you adjust the tension on bobbin thread?
8. What is tension control on a sewing machine?
9. What is thread guide?

What regulates tightness or looseness of the stitches?

Tension controls the looseness and tightness of stitches.

Which part of the sewing machine that used to controls the looseness and tightness of stitches *?

Tension Regulator (7)

This dial controls the tension on the top thread. With proper tension the top thread and bobbin thread will join together in uniform stitches. If the tension is set too tight, the stitch will pucker and break; if set too loose, the stitches will not hold.

What is stitch regulator?

What is a Stitch Regulator? A stitch regulator is designed to sense how fast the fabric is being moved underneath the foot and then adjust the speed of the needle going up and down to create the perfect stitch length. ... Bernina is the only home sewing machine brand with stitch regulated technology built-in.

What is a stitch width regulator?

Stitch Width Regulator/Selector - The mechanism that allows you to adjust the width of a wide stitch, such as a zigzag stitch. Take-up Lever - Part of the upper threading sequence, it helps control the flow of thread. It's the part that goes "up and down" as you sew.

What is spool pin?

Definition of spool pin

: a spool-shaped pin tumbler used in some cylinder locks to foil picking attempts.

Where do you place the spool of thread?

Place your spool of thread on the top of the sewing machine, on the spool pin. The spool should be turned so that the thread will be released counter-clockwise. Check the top of your machine for a diagram before you place your thread spool.

How will you adjust the tension on bobbin thread?

To tighten your bobbin tension, turn the tiny screw on the bobbin case a smidgen clockwise. To loosen bobbin tension, turn the screw counterclockwise. A quarter turn or less is a good place to start.

What is tension control on a sewing machine?

Sewing machine tension adjustment is controlled by devices that separately control the needle thread and the bobbin thread, putting varying amounts of tension (or strength) on the threads they control to form a strong, balanced stitch.

What is thread guide?

noun In a sewing-machine, a device, as a loop or an eye, for guiding the thread when it is necessary to change the direction at any point between the spool and the eye of the needle.