Diyvehiclerepair
- Why is it dangerous to follow a truck closely?
- Why should you not pull in front of a truck or other large vehicle and slow down or stop suddenly?
- Why should you increase your stopping distance between cars when you are traveling at higher speeds?
- When should you start slowing down for a red light?
- Why should you slow down and wait while a heavy vehicle is turning?
- Can the driver of the truck see you?
- How much longer does it take a truck to stop during bad weather?
- When should you get passed?
- Why is stopping distance important?
- When should you slow down when driving?
- How does speed affect stopping distance?
- Should you slow down at traffic light?
- Why should you slow down and look for a safe place to stop?
- Should you slow down when approaching a green light?
Why is it dangerous to follow a truck closely?
The overtaking position is closer to the vehicle in front, so you have to be more vigilant about the road and its hazards ahead. ... If you follow too closely for too long it might pressure the other driver into speeding up slightly and that will make it more difficult for you to overtake.
Why should you not pull in front of a truck or other large vehicle and slow down or stop suddenly?
Slowing suddenly can cause a traffic crash. Watch for large trucks and small, underpowered vehicles on steep grades or when they are entering traffic. They can lose speed on long or steep hills and it may take longer for these vehicles to get up to speed when they enter traffic. Never stop on the highway itself.
Why should you increase your stopping distance between cars when you are traveling at higher speeds?
The faster you are traveling, the longer it will take for your vehicle to stop. As speed increases, each of the stopping distance factors increases. The faster you go, the longer it takes to perceive, react, and brake. Traction also impacts your stopping distance.
When should you start slowing down for a red light?
Ray: When you see a red light 100 yards ahead, Gerald, the proper thing to do is take your foot off the accelerator, and start coasting to slow down. Continuing to accelerate once you see a red light ahead just wastes gas.
Why should you slow down and wait while a heavy vehicle is turning?
Do not put your vehicle in the path of a large, heavy vehicle when it's turning – you may be crushed. It's safest to stay behind and wait until the vehicle has completed the turn.
Can the driver of the truck see you?
When you're driving close behind a truck in slower traffic, not only can the truck driver not see you, but you can't see what's happening up ahead. Watch for the truck's indicators and brake lights, so you're ready to slow down if the truck turns, slows or stops.
How much longer does it take a truck to stop during bad weather?
between one-half hour after sunset and one-half before sunrise and anytime during bad weather when visibility is 500 feet or less.
When should you get passed?
Explanation When being passed, you must yield to the passing vehicle and not increase your speed. Allow the vehicle to safely merge back into your lane.
Why is stopping distance important?
Braking distance is the distance the vehicle travels from the point at which the driver applies the brake until the vehicle actually comes to a complete stop. ... It's also important to scan ahead for possible obstructions and other dangers while driving. Time is paramount to preventing collisions and bodily injury.
When should you slow down when driving?
Did You Know? You should reduce your speed by 1/3 on wet roads and by 1/2 or more on snow packed roads (i.e., if you would normally be traveling at a speed of 60 mph on dry pavement, then on a wet road you should reduce your speed to 40 mph, and on a snow-packed road you should reduce your speed to 30 mph).
How does speed affect stopping distance?
The braking distance also depends on the speed of the car, the mass of the car, how worn the brakes and tyres are, and the road surface. ... A faster speed increases both thinking and braking distance, increasing the total stopping distance.
Should you slow down at traffic light?
Everyone should slow down a bit when they're approaching an intersection, because you never know what might happen. ... A light might suddenly change, or a pedestrian or bicyclist could dart out in front of you. It's ALWAYS best to be cautious behind the wheel.
Why should you slow down and look for a safe place to stop?
Slow down to avoid people and cars who may be gathered at the scene of the accident, including tow trucks, emergency vehicles and law enforcement. ... Seeing a wreck on the highway can be scary, but it's yet another reminder to drive safely.
Should you slow down when approaching a green light?
Explanation When approaching an intersection with a steady green traffic light, yield to pedestrians in the crosswalk and vehicles still in the intersection. You may continue driving, but should approach the intersection at a speed that will allow you to slow down and stop if the light changes before you get there.
